Terminal Strips & Bus Bars

Terminal Strips & Bus Bars
Terminal Strips | Bus Bars | Connector Strips

Download PDF Data Sheet

Terminal Strips
Use as a common negative/neutral bus for AC or DC systems. Dual terminal strips in 4 or 8 screw positions on 3/4” centers are secured to a high density insulated base. All hardware, bus material and fasteners are nickel-plated brass.

#8 screws accommodate various size ring terminals and each terminal strip is rated for 100 amps.

Interlocking bases allow use of multiple terminal strips and bus bars (described below) to produce secure and neat wiring assemblies. The terminal strip bases have provisions for either #8 or #10 mounting screws, and no conductive parts in the base are exposed to the mounting surface

Model	Total # of Base Terminals	Size
TS-2x4	8	3 1/16” x 1 1/2”
TS-2x8	16	6 1/16” x 1 1/2”

Buss Bars

Heavy duty 500 amp rated bus bar assemblies feature 5/16” studs on 1” centers in 1/4” thick copper bar for common connection/distribution of large wire gauges and accommodate 5/16” ring terminals.

All bus material is nickel-plated copper.

A clear insulating protective cover is provided to prevent short circuits and provide visibility of lugs.

The mounting bases are keyed for interlocking and may be mated with the terminal strips (described above). Conductive parts are captured and recessed away from the mounting surface. Use #8 or #10 screws for mounting.

Model	Qty. of 5/16” Studs	Base Size
BB-2	2	3 1/16” x 1 1/2”
BB-2/8	2 plus 8 - #8 screws	6 1/16” x 1 1/2”
BB-5	5	6 1/16”” x 1 1/2”
BB-8	8	9 1/16”” X 1 1/2”

Connector Strips

Molded nylon encases 6 or 12 pairs of connectors that use screw compression to secure wires without use of lugs. ideal for electronic installations. (Same connector strip used in BX Series boxes.)

5 Sizes: ranging from 6 to 16 gauge

Strips are easily cut to meet wiring requirements and space limitations.

Model	# of Terminal Pairs	Max Wire Gauge	Max Amps*	Size
Model	# of Terminal Pairs	Max Wire Gauge	Max Amps*	L X W X H
CS-1	12	16	6	3.75” x .675” x .5”
CS-2	12	14	10	4.5” x .75” x .75”
CS-3	12	12	20	5.5” x .875” x .8”
*Per set of terminals

High Current Fuses/Fuseblocks

Essential safety item for all inverter installations and other high amperage DC circuit over-current protection.
Heavy duty 500 amp, insulated, compact fuse block with corrosion-resistant 5/16” studs.
Secures to surface with two # 10 flat head screws or bolts (not included)
Clear lexan cover insulates conductive parts, per ABYC/USCG requirements.
Accepts industry standard ANL tin-plated copper fuses. Purchase separately.
See-through mica element for easy identification of blown fuse.

Fuseblock Model: AFB-500

Fuse Models (numeral indicates amperage):
ANL-50, ANL-100, ANL-150, ANL-200, ANL-250, ANL-300, ANL-350, ANL-400, ANL-500 (All rated to 80 VDC)