PX Series Waterproof Junction Boxes
• Waterproof junction box with terminal strip for electronic connections in areas subject to spray, washdowns, etc.
• Rugged, non-corrosive polypropylene housing
• "Universal" cut-to-fit cable entries, diameter range: .14 -.81”
• Brass compression screw terminals
• Wire gauge: 16 AWG
| Model |
Terminals |
| PX-1 |
6 Pair |
| PX-2 |
12 Pair |
| PX-3 |
18 Pair |
BX Series Splashproof Junction Boxes
• Splash proof junction box with terminal strip
• Rugged cast aluminum box and cover with enamel finish
• Multiple rubber grommet cable entries
• Brass compression screw terminals
| Model |
Terminals |
Wire Gauge |
| BX-1 |
6 Pair |
16 AWG |
| BX-2 |
12 Pair |
16 AWG |
| BX-3 |
18 Pair |
14 AWG |
EX Series Electrical Enclosures
• Corrosion-resistant polycarbonate cases ideal for emergency vehicle applications
• Deep cavity design leaves room for securing wiring and components and making connections
• Instruments, switches and panels can be surface mounted to the cover |
|
Application example - EX-474 shown
with digital instruments mounted in cover
|
 |
Enclosure
Model |
Size L x W x D
(inches) |
Knock-Outs
(size cross-reference below) |
| EX-373 |
7.09 x 3.7 x 3.19 |
14 ea. PG-16 |
| EX-474 |
7.09 x 4.33 x 4.37 |
16 ea. PG-16, 4 ea. PG-21, 2 ea. PG-29 |
| EX-1074 |
7.09 x 10.0 x 4.37 |
24 ea. PG-16, 8 ea. PG-21, 4 ea. PG-29 |
Feed-Through Fittings
CCX Series
• Create a 100%waterproof seal when routing cables through communication huts, cabnets, etc.
• Allow installation/removal with connector still attached
• Rugged weatherproof nylon with neoprene seal
• Entry hole predrilled
Model |
Cable Diameter Range |
Max Connector Diameter |
CCX-R |
.47"-.59" |
1.57" |
CCX-S |
.35"-.55" |
.83" |
CCX-T |
.18"-.35" |
.83" |
DX Series
• Similar to CCX Series except installer drills holes in seal to accommodate cable(s)
• Multiple cables may be routed through a single fitting
| Model |
Drill Thru Aperture |
Max. Connector Dia. |
| DX-2 |
1.2" Diameter |
1.2" |
| DX-3 |
1.65" Diameter |
1.65" |
| DX-5* |
1.65" Diameter |
2.0" |
*Aluminum Housing
Cable Entries
Choose from waterproof or splash-proof enclosure cable entries in various sizes. |
Waterproof Fittings
For complete waterproof assembly (IP68) use these compression fittings. Retaining nut secures fitting to enclosers, compression hub creates waterproof seal around wires. Various sizes are available in a wide range of cable diameters.
|
|
| Model |
Cable Diameter
Range |
Mounting Hole
Diameter |
EX Enclosure
Knock-Out Size Ref. |
| WPF-1 |
.2”-.47” |
1” |
PG-16 |
| WPF-2 |
.35”-.71” |
1.25” |
PG-21 |
| WPF-3 |
.55”-.98” |
1.5” |
PG-29 |
|
Splash-Proof Fittings
Flexible fittings snap into access holes on enclosures. Graduated diameter, cut-to-fit sizing accommodates a wide range of cable diameters. Can also function as a splash-proof plug on knocked-out enclosure access hole. Sold in pairs.
 |
 Graduated Diameter,
Flexible Cut-to-fit Cable Entries |
| Model |
Cable Diameter
Range |
Mounting Hole
Diameter |
EX Enclosure
Knock-Out Size Ref. |
| SPF-1 |
.14”-.81” |
1” |
PG-16 |
| SPF-2 |
.14”-.99” |
1.25” |
PG 21 |
|
