 Battery Chargers - EV Series
Low Profile, 20 & 40 Amp, Smart Chargers
Get more battery charging power in a compact package that saves valuable compartment or under seat space in fire apparatus and other emergency vehicles. The EV series smart chargers provide rapid replenishment of batteries, with a clean, no electronic interference output. Front panel connections allow easy wiring of batteries, remote meter, and auxiliary loads such as hand lights/radios /air pumps.
EV Series Features
• Super low profile design: saves valuable compartment andunder seat space
• Auxiliary 15 amp output circuit with power source selector switch for operating accessory
loads: air pump, flashlights or handheld radios
• Optional mounting plate features slide-in and lock designfor easy installation/removal
under seats and other hard to access locations
• Heavy duty terminal block for secure connections
• Durable powder coat finish
• Available as kit with remote battery meter (EVM-12-1), Kwik-Eject, air pump
EV-40 Features
• Fast 3 step charging: Produces up to 40 amp output to quickly replenish batteries, then
switches to lower float voltage maintenance mode for no overcharging• Battery type
selector switch to program use with Gel Cell/ Flooded Lead Acid/AGM batteries
• Clean 40 amp output poses no interference with radios and other mobile electronics
• Low profile design, only 3.2" high
EV-20 Features
• 20 amp rating, clean output - no electronic interference
• 2 step charging, bulk-float
• Lowest profile design, only 2.32" high
Model |
Output |
Size* |
Weight |
EV-20 |
20 Amps |
2.32”H x 13.12”D x 6.8”W |
5 Lbs. |
EV-40 |
40 Amps |
3.13”H x 13.12”D x 6.8”W |
7 Lbs. |
* Same mounting footprint as K-1200
Options
Remote Meter
 |
Slide-In Mounting Plate Assembly
 |
Kick Plate
 |
Kwik-Eject
 |
Air Pump
 |
Combination Kits
Model |
EVM-12-1 |
Kwik-Eject |
Air Pump |
EVXX/12-1 |
X |
|
|
EVXX/12-1/Eject |
X |
X |
|
EVXX/12-1/Eject/Pump |
X |
X |
X |
EVXX/12-1/Pump |
X |
|
X |
EV-40 Front Panel Connections
Click Here For Enlarged View 
Slide-in and Lock Mounting System
The Slide-in and Lock mounting plate system is designed to ease installation and removal of the EV-40 charger in hard to access areas such as under seats and in small compartments:
• Charger is secured to the slide and lock plate via 4 stud mounts. Note charger can be
oriented either direction on the plate to meet desired location of front panel wiring
• The Vehicle mounting bracket is secured in its desired location via 6 fasteners
• Charger with plate attached then slides on to the vehicle mounting bracket and is captured
via two insertion pins at one end and secured in place via stainless steel fasteners and
compression angle bracket at other end.
Click Here For Enlarged View
|
